Here’s a video I put together on upgrading 1.5.3 to 1.5.3.1. Also the PiDash Updater is very close to completion. Just need to add code to enable Mausberry support and some small stuff.
Related Posts
New sheetmetal intake for the Turbo Camaro
Going slowly down here in Texas. With Christmas around the corner, I decided to get my turbo car a...Picked up a 406 SBC and a TH350 race prepped trans
A good friend of mine found a 406 SBC and short shaft TH350 race prepped trans with a converter. I...